If you would need 2 wireless microphones, and have just one channel available, the COM-42 is the perfect wireless microphone set for you.
The wireless receiver has a balanced XLR output for each wireless transmitter, and also a unbalanced MIX output on a 6.3mm Jack plug.
By using the volume buttons on the front of the receiver, it is easy to setup the desired balance between 2 transmitters.
The COM-42 has 99 frequency presents which can easily be set by Infra-red synchronisation technique. A clear LCD display shows the signal strength, audio level and carrier frequency of each channel.
A COM-42 wireless microphone set contains a receiver and 2 metal handheld transmitters. Also it is possible to use an optional beltpack transmitter.
Features
Handheld Transmitter
- Type: Dynamic, moving coil
- Polar pattern: Cardioid
- Frequency Response: 50-16.000 Hz
- Dynamic: >100dBu
- Sensitivity (1000 Hz): 2,2 mV/Pa* (*1 Pa = 94 dB SPL)
- Max. SPL: 135 dB (1% THD)
- Power supply: 2x Battery UM3, AA1.5V (not included)
- Operation time: >6 hours
- Accessories: 4 Colour-coded stickers, Mini screw driver
- Carrier Frequency Range: 606-630MHz
- RF Output: 10 mW
- Stability: ±0.005%
- Frequency Deviation: ±225 kHz
- LED Indicator: Low battery, Power On/Off
- Controls: Power On/Off, Gain
- Spurious Rejection: <-50 dBm
- Dimensions: Ø 50 mm x L 260 mm
- Net. Weight: 0,27 kg
Receiver
- Receiver Type: Dual receiver UHF synthesised
- Frequency Response: 50-16.000 Hz (±3dB)
- Dynamic: >100dBu
- Power supply: 15VDC, 300mA (PSU included)
- Carrier Frequency Range 606-630MHz
- Stability: ±0.005%
- Frequency Deviation: ±225 kHz
- Display Indicator: Channel, Frequency, AF & RF
- Controls: Power On/Off, Volume, Pair, Up/Down
- S/N Ratio: >100 dB
- Dimensions: 45 X 210 X 210mm
- Net. Weight: 1,00 kg