The sE Electronics sE 4400a is the latest in a lineage of microphones started 6 years ago with the sE 2200a. Based on the same capsule tuning, but with a dual capsule to give multi polar pattern function, this mic is a true all-rounder. The sE4400a has 4 polar patterns: Cardioid, Hypercardioid, Omni & Figure of Eight. Dual Pad & Dual Low Cut. Supplied with Premium Shockmount in Flightcase.
The sE Electronics sE 4400a is the latest in a lineage of microphones started 6 years ago with the sE 2200a. Based on the same capsule tuning, but with a dual capsule to give multi polar pattern function, this mic is a true all-rounder.
The sE4400a has 4 polar patterns: Cardioid, Hypercardioid, Figure of 8 and Omni. The 4400 A has 2 bass cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB.
The sE4400a has a unique, black, non-reflective, non-marking, rubberised finish which is ideal for live stage, theatre, TV and broadcast applications which require lighting.
Finally, the capsule has been specially tuned after almost 2 years of pre-market tests with professional studios and broadcasters, to really be something that very few mics can; the true all-rounder.
The mic is multi-functional yet uncluttered, the sound is smooth and flattering and yet, because the capsules are hand made (like all sE mics) and then individually tuned, it benefits from lacking the usual hyped top end of most modern mass produced mics from automated machines.
The sE Electronics 4400a comes with a unique shock mount which allows you to fit the mounted mic into tiny spaces, or invert the shock clamp to extend the mic fully outside the shock mount for close mic-ing applications or vocals. The multi pattern sE4400a also comes with a full, steel re-enforced, black aluminium, signature sE flight case.
Features
- Frequency Response: 20Hz-20kHz
- Sensitivity: 14.1mv/pa-37db ± 1dB
- Polar Pattern: Cardioid, Figure 8, Omni, Supercardioid
- Impedance: ≤ 50 Ohms
- Equivalent Noise Level: 17dB (A weighted)
- Max SPL for 0.5% THD@1000Hz: 130dB
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin XLR