This classic has been updated with new features adapting it to the demands of modern music production environments. Advanced source and speaker selection, multiple monitoring modes, an integrated premium talkback system, headphone amplifiers with Phonitor Matrix, an additional input for a dedicated artist mix, and an internal audio operating voltage of +/-18 volts make the MTC Mk2 once again the professional studio standard among monitor controllers. Create perfect mixes – for you and your artist – on speakers and thanks to the Phonitor Matrix, also on headphones. The 45 mm big, massive, milled from aluminum knob for the analog volume control, offers the perfect control range to adjust the monitoring volume intuitively and precisely.
The MTC Mk2 provides three pairs of outputs for stereo speakers and a mono output for a subwoofer. The respective stereo pairs are selected with high-quality analog switches. Each pair has its individual switch. Thus, multiple selection is also possible. The SUB switch can be used to switch an additional subwoofer on and off. The SUB can be combined with any speaker pair. The subwoofer output sends a mono summed signal with full frequency range. Alternatively, a mono monitor speaker can be connected to the SUB output.
MTC Mk2 allows three different monitoring modes. As a standard, the mix can be monitored in “stereo”. Mono compatibility can be checked in “mono”. The phase of the signal can be reversed via the phase inversion switch Ø. A special feature is the third mode – the channel swap function: LR SWAP. LR SWAP reverses the stereo image. Left becomes right and right becomes left. This is especially time-saving when you are monitoring samples in video dubbing that should match a scene with direction of movement. If the direction is not correct, you usually have to load the sample into the DAW to switch channels. LR SWAP allows channel swapping directly in the monitor controller.
By using the MONO and the phase invert switch in combination, it is possible to only monitor the M or S signal. When “Mono mode” and phase inversion is active, only the S signal is played back. If the phase inversion is switched off, the Mono signal corresponding to the M signal is played back. Separate monitoring of the M and S signals has become a standard for many mixing and mastering engineers.
Besides the DIM switch for a quick attenuation of the monitoring volume by 10 dB, the MTC Mk2 also offers the option of completely switching off all speaker outputs with the SP MUTE switch. This is useful, for example, when monitoring via a pair of speakers with a subwoofer. So only one switch has to be pressed to turn off this combination. If an error occurs in the DAW and a full level noise signal is output from the computer, activating the mute function protects the connected equipment and the hearing from damage. In addition to the SP MUTE, there is also an HP MUTE. This deactivates the headphone outputs of the MTC Mk2. (This does not apply to headphone output HP 2 when CUE MIX is activated).
The MTC Mk2 delivers full headphone sound – twice! The output stage of the headphone amplifiers is designed as a push-pull amplifier in Class AB mode. The bipolar transistors share the amplification of the positive and negative half-waves, which produces a higher gain and a higher output voltage than in Class A operation, where only one transistor amplifies both half-waves. The output stage transistors are thermally coupled and thus run particularly coherently, which contributes to a consistent and stable sound image. The power supply has a buffer circuit with low source resistance, ensuring generous current reserves even when operating low-impedance headphones. Both headphone amplifiers feature the Phonitor Matrix.
The Phonitor Matrix enables mixing and mastering engineers to create perfect mixes on headphones, which will translate perfectly to all types of stereo speaker systems. The SPL Phonitor Matrix corrects the false representation of the stereo sound image, which makes it much easier to find the right decisions for mixing and mastering engineers. So nothing stands in the way of a successful and long mixing session on headphones.
Features
- 3 monitoring modes: Stereo, Reverse Phase, and LR Swap
- Mono switch to check your mix's mono compatibility
- Enables you to monitor the mid and side portions of your mix individually
- Dim switch and separate Mute switches for your speakers and headphones
- Enough outputs for 3 pairs of stereo speakers, along with a mono output for a subwoofer
- Dedicated on/off switch for each pair of outputs, plus separate Sub switch
- 4 stereo inputs (balanced and unbalanced connectors)
- Dedicated meter output and studio monitor level calibration
- Talkback system with a built-in condenser mic
- Level control for the talkback signal
- Talkback system automatically attenuates the artist's cue mix
- Footswitch input enables hands-free use of the talkback system
- High-quality push-pull, Class AB headphone amplifier with thermally coupled output stage transistors
- 2 headphone output jacks, each with a dedicated level control
- Phonitor Matrix re-creates speaker-like spatial effects when listening on headphones
- +/-18V internal operating voltage accommodates levels up to +22.5dB with added headroom
- Employs through-hole technology for all important components
- High-quality switched-mode power supply